TM 11-6625-1830-12
b. Control Unit and Module Teat Set Proce-
dures. Perform the preliminary procedures listed
below before starting the equipment (pars 2-
11b).
(1) Depress the pressure relief valves (fig.
l-l and 1-8) to allow the internal and external
pressure to equalize.
(2) Unfasten the draw-bolt latches and re-
m the covers from the control unit (fig. l-l)
and the module test set (fig. 1-3).
(3) Remove the cables and test leads from
the covers of the control unit and the module test
set.
(4) Interconnect the control unit and the
module test set as illustrated in figure 2-10.
Previous Page
