TM 11-6625-1830-12
tightening of the clenching rim clamp assembly
is accomplished with the receiver-transmitter re-
moved from the RF test set. The final tightening
is done with the unit removed from the RF test
set to prevent range to the RF test set compo-
nents from the vibration caused by the tapping
with the mallet.
g. Rotate the RF test set baseplate and install
the other housing cover and clenching rim clamp
assembly using the same procedure as given in e
and f above.
h. Remove the hardware securing the receiver-
transmitter to the RF test set rt mounting brack-
et. Carefully remove the receiver-transmitter
from the RF test set and set it on a paged sur-
face with the blower housing up.
Previous Page
