TM 11-6625-1830-12
ORGANIZATIONAL
MAINTENANCE
Section I. GENERAL
Required
The following tools, test equipment, and materi-
ala are required for organizational maintenance.
a. Sandpaper (fine)
b. Electrical tape (black plastic)
c. Paint brush
d. Tool Kit, Electronic Equipment TK-101/G
e. Multimeter AN/URM-106
f. Primer, color Y per MIL-P-8585
g. Enamel, light gray type III, class 2 per
MIL-E-15090
and services should be performed at 15-day inter-
9-3. General
vals. Adjustment of the maintenance interval
is the systematic camp
must be made to compensate for any unusual
I of equipment to prevent
operating conditions. The requirement for month-
the occurrence of trouble, to reduce downtime,
ly and or quarterly preventive maintenance checks
and to assure that the equipment is serviceable.
and services in not limited to equipment in every-
The contents of paragraph 8-3 apply to organi-
day use. These preventive maintenance checks
zational preventive maintenance as well as to
and services must also be performed on equip
maintenance.
ment maintained in a standby (ready for immedi-
ate operation) condition. Equipment in limited
storage, which requires servicing before opera-
Checks and Services Periods
tion, does not require monthly and or quarterly
maintenance. Operator's daily and weekly and
organizational monthly preventive maintenance
checks and services constitute a part of the
quarterly preventive maintenance checks and
services and must be performed concurrently.
All deficiencies will be recorded in accordance
with the requirements of TM 38-750.
Previous Page
