TM 11-6625-1830-12
b Cable Repair Repair cables that are cracked,
cut, or badly chafed by wrapping with black,
a. Cable Continuity Check. Turn off power to
plastic electrical tape Straighten bent connector
test set and disconnect cable from test set and
pins with a small pair of needle-nom pliers, being
equipment under test. Use the ohmmeter and
careful not to break the pins If the cable con-
check the continuity of the cable from pm-to-pin
nector is corroded, clean with cleaning compound
If any pin-to-pin measurement indicates an open
and a soft-bristled brush If the cable cannot
(no continuity), refer to higher category mainte-
be repaired by any of the above methods, refer
to higher category maintenance
mance
Previous Page
