TM 11-6625-1831-13
2.5 INSTALLATION AND PREPARATION FOR USE (Cont)
LOCATION/ ITEM
ACTION
REMARKS
CONNECTION
TO POWER
3.
TEST PANEL
a.
POWER IN J4 jack
Unscrew cover.
b.
PWR switch
Set to OFF.
4.
CABLE W3
a.
Plug P2
Connect to POWER
IN J4 jack.
b.
Plug P1
Connect to power
Test set needs 115-volt line-to-
source.
neutral 3-phase, 400-Hz power
5.
TEST PANEL
a.
PWR switch
Set to ON.
b.
PANEL LIGHTS TEST
Momentarily set to TEST (up).
Test panel lamp test.
switch
Check that all panel lights
illuminate.
c.
PWR switch
Set to OFF until test set is ready
for use.
2-9
Previous Page
