TM 43-6625-916-12
RADAR TEST SET
0005 00
ASSEMBLY AND PREPARATION FOR USE - Continued
PREPARATION FOR MODE 4 INTERROGATOR PROCEDURE
a. The KIT-1C must be connected to the Test Set at all times during Mode 4 interrogator testing.
NOTE
The internal battery of the COMSEC device must be installed in order to
operate properly with the Test Set.
b. Once the Test Set and keyed KIT-1C are connected via the KIT/KIR-1C cable, Mode 4 interrogator testing
may begin.
NOTE
After interrogator testing is completed, the COMSEC device may retain the
key information.
c. Mode 4 Zeroize Procedure
The COMSEC must be zeroized by pressing its zeroize button on the front panel.
END OF WORK PACKAGE
Previous Page
