TM 11-5840-281-12-1
3-4. CURSOR ALINEMENT CHECKS. (CONT)
ELEVATION CURSOR
1. Place SCAN MODE switch (1) on both control-indicators to NORM position.
2. Place SCAN switch (2) on master to ON position.
3. Place ANGLE VOLTS switch (3) on both control-indicators to OPERATE position.
4. Place RANGE MILES switch (4) on both control-indicators to 10 position.
5. Adjust IF GAIN EL control (5) on master control-indicator to desired level.
6. Place TRANSMITTER switch (6) on master to WIDE PLS or NAR PLS position.
7. Place EL CURSOR switch (7) to GP position.
8. Press HV ON switch (8) on master. HV ON indicator lamp in switch will light on both control-indicators.
9. Use ANTENNA switch (9) on master to position elevation antenna.
3-6
Previous Page
