TM 43-6625-916-12
RADAR TEST SET
0007 00
The Test Set battery compartment is polarized to prevent a battery stick from
making contact if installed with incorrect polarity. Do not use undue force
when installing a battery stick. Damage to battery stick and/or battery charger
may result.
NOTE
Battery stick will not be damaged by undercharging, but number of tests per
charge will be reduced. Continuous undercharging may shorten life of battery
stick.
BATTERY CHARGING INSTRUCTIONS USING EXTERNAL BATTERY CHARGER/DISCHARGER
Do not attempt to charge any batteries other than the supplied battery sticks
or commercial C-size NI-CAD or NiMH batteries. This could result in battery
explosion and cause injury or death.
Operator's Controls and Indicators
Figure 7-1 shows the location of
all battery charge (PN: 01-1045-10) controls, indicators, and connectors.
Table 7-1 identifies and describes the function of
controls, indicators, and connectors related to
battery
charging.
1
BATTERY CHARGER/DISCHARGER
TO CHARGE BATTERY
TO DISCHARGE BATTERY
TO REFRESH BATTERY
!
!
!
1. CONNECT POWERSUPPLY TO CHARGER
1. DISCONNECT POWERSUPPLY.
1. CONNECT POWERSUPPLY TO CHARGER
2. INSERT BATTERY AND PRESS START BUTTON.
AND PLUG SUPPLY INTO POWEROUTLET.
AND PLUG SUPPLY INTO POWEROUTLET.
2. INSERT BATTERY (NOTE POLARITY) AND PRESS
2. INSERT BATTERY(NOTE POLARITY).
3. RED LIGHT INDICATES DISCHARGE IN PROGRESS.
FLASHING YELLOW LIGHT INDICATES CHARGING.
4. DISCHARGE IS COMPLETED WHEN LIGHT IS OFF.
3. CHARGE IS COMPLETED WHEN LIGHT IS OFF.
REMOVE BATTERY.
FLASHING YELLOW LIGHT INDICATES CHARGING.
REMOVE BATTERY.
3. WHEN BOTH LIGHTS ARE OFF, REMOVE BATTERY.
5
WARNING:
!
> USE ONLYWITH 7.2 V NiCad ORNiMH RECHARGEABLE BATTERIES.
DISCHARGE
CHARGE
> USE ONLYWHEN TEMPERATURE OF CHARGER AND BATTERIES IS BETWEEN 0 AND 40 C.
> INDOORUSE ONLY. DO NOT EXPOSE CHARGEROR POWERSUPPLYTO RAIN OR MOISTURE.
> FOR USE ONLYWITH 12 V dc, 2 AMP MIN./4 AMP MAX. POWERSOURCE.
START
> DISCONNECT POWER SUPPLYFROM POWEROUTLET WHEN NOT IN USE.
12 V dc, 4 A
4
23
Figure 7-1. Location of
Battery Charger
Controls, Indicators, and Connectors