TM 43-6625-916-12
RADAR TEST SET
0008 00
BENCH UTILITY - Continued
OPERATION
To start the Bench Utility, click "Start" on the Desktop Taskbar and go to "Programs", "TS-4530/UPM", then
select "Bench Utility". The Test Manager screen will appear as shown in Figure 8-1.
NOTE
The program automatically searches for a Test Set when it starts. A Test Set
can be connected at any time. A message will pop-up to indicate if a Test
Set is not detected. The operator can connect a Test Set and press "Retry"
or press "Cancel" to connect a Test Set later.
The program interface consists of two parts. The menu bar consists of the column of buttons on the left of the
program window. Use these buttons to select the desired program activity. The available selections are "Test
Manager", and "Miscellaneous". The user can toggle between the two panels by selecting the appropriate
button. In addition, "Help", "About", and "Exit" buttons are located on the menu bar.
1.
Test Manager
The "Test Manager" button displays a panel that can be used to download and view test data records
stored in the TS-4530/UPM. Prior to viewing test data records, they must first be downloaded from the
unit to the computer.
To download the test data from the TS-4530/UPM, first ensure that the unit has power and is attached to
the serial port (Comm 1 - 4) of the computer with the provided 9 pin RS-232 serial cable (PN: 55-1045-
15).
Previous Page
