1. Purpose. Provide a cleaning requirement to remove salt / salt laden sand and other corrosive contaminates
from Air Traffic Control Central AN/TSW-7A returning from OCONUS Desert Operations.
Environmental conditions within the Southwest Asia (SWA) theater of operations were conducive to the
introduction of salt laden sand and other corrosive substances into the interior surfaces of the Air Traffic
Control Central facility. These substances, if allowed to remain will accelerate the corrosion process and lead
to premature corrosion damage. Immediate removal of these Substances is imperative in order to minimize
future corrosion damage. This Technical Bulletin (TB) is issued to provide special inspection and cleaning
procedures for all deployed/redeployed Air Traffic Control Central facilities.
2. Priority Classification. NORMAL.
a. Equipment In Use. No later than 30 days after redeployment from Desert operations. Deployed Air
Traffic Control Central facility will complete cleaning procedures as necessary but as a minimum at
b. Equipment in Storage. No later than 30 clays after redeployment from Desert Operations. Equipment
deployed will complete cleaning procedures as necessary but as a minimum quarterly.
3. End Items to be Inspected. All Air Traffic Control Central facilities after redeployment from Desert
operations. Deployed Air Traffic Control Central facility will complete requirements as necessary but at a
minimum at next PMCS.
4. Assembly Components to be Inspected. Not applicable
5. Parts to be Inspected. Not applicable.
a. Category of Maintenance - Organizational/Direct Support (UNIT Level).
b. Time Required. As required to comply with this TB.
Estimated Cost Impact of Stock Fund Items to the Field. Not applicable.
d. TB/MWOs applied prior to or concurrently with this inspection. Not applicable.
e. Publications which require change as a result of this inspection. Not applicable.
7. Supply / Parts and Disposition.
a. Parts Required. Not applicable.
b. Requisitioning Instructions. Requisition materials through normal supply channels using normal supply
procedures. Requests should be the highest priority authorized by Force Activity Designator (FAD). If
the delivery is forecasted to be in excess of 21 days; or if materials are not received within 21 days of
ordering contact your local GSA Customer Service Center DSN 695-4865 as appropriate to specific
item of concern. If unable to requisition items within the allotted time frame contact one of the POCs
listed in this TB.