TM 43-6625-916-12
RADAR TEST SET
0006 00
OPERATION UNDER USUAL CONDITIONS - Continued
STEP
BUTTONS PRESSED
RESULTS/REMARKS
From the "Device to test
"Inter Test Sensitivity?" screen is shown.
NOTE
Transponder" screen, go to
the "Inter Test Sensitivity?"
It may be necessary to
screen.
press S2 to navigate to the
appropriate interrogator
test menu screen because
the Test Set retains the
previous state of the last
test or action performed.
Press S2, S1. Then press S2
the number of times necessary
to cycle to the "Inter Test
Sensitivity?" screen.
From the "Inter Test
Press S1.
The "MDL Test Margin" screen is shown.
Sensitivity?" screen, go to the
"MDL Test Margin" screen.
Pressing S2 will increase the Margin dB
in one dB increments. The range is 0 dB
to 12 dB.
The operator can go to the Interrogator
Temp Setup by pressing S2 for at least 3
seconds and releasing. Refer to
STEP
BUTTONS PRESSED
RESULTS/REMARKS
From the "Device to test
"Inter Test Automatic?" screen is shown.
NOTE
Transponder" screen, go to
the "Inter Test Automatic?"
It may be necessary to
screen.
press S2 to navigate to the
appropriate interrogator
test menu screen because
the Test Set retains the
previous state of the last
test or action performed.
Press S2, S1. Then press S2
the number of times necessary
to cycle to the "Inter Test
Automatic?" screen.
Previous Page
