TM 43-6625-916-12
RADAR TEST SET
0006 00
OPERATION UNDER USUAL CONDITIONS - Continued
STEP
BUTTONS PRESSED
RESULTS/REMARKS
From the "Device to test
"Xpdr Test Automatic?" screen appears.
NOTE
Transponder" screen, go to
the "XPDR Test
It may be necessary to press
Automatic?" screen.
S2 to navigate to the
appropriate transponder test
menu screen because the
Test Set retains the previous
state of the last test or action
performed.
Press S1, S2.
From the "Xpdr Test
Press S1.
Automatic mode provides testing of all
Automatic?" screen, start
transponder formats with the speed and
the testing in the Automatic
convenience advantage of a single button
Mode.
push (S1). Pushing S2 will repeat the test
in its entirety.
The operator can go to the Transponder
Temp Setup by pressing S2 for at least 3
seconds and releasing.
Store results (if desired).
Pressing the S1 button when all
Once the test sequence has been
formats are completed at the
completed, the operator is given the option
end of testing provides the
to save the test data to memory. If saved,
"Save Test Data?" screen. This
the test number is displayed. In order to
screen provides YES and NO
correlate the test results with the test aircraft
options.
the operator must record the test number
and aircraft tail number. The data can be
The S2 button then serves as a
downloaded to a PC when testing has been
toggle switch between YES and
completed.
NO.
If desired, download and
Go to WP0008 00.
view/print stored results
using the bench utility.
Previous Page
